Kahuna Beach Wheel Sand Tires

 It would be a huge mistake to compare these wheels to anything else to roll on soft beach sand. These highly durable specialty made balloon wheels are tear and puncture resistant, designed to flatten and hover over a pliable surface area before fully placing a load onto it. The Kahuna Beach Wheels help you glide over the softest beach sand instead of digging a trench into it. The purpose is to reduce drag, thus saving you the hard work of pulling your stuff to the beach. Anything less and it will be like pulling a stack bricks through molasses.

 These low air pressure heavy-duty polyurethane wheels work best in sand between 2.5 - 3 PSI (Pounds Per Square Inch). Maximum pressure is at 4 PSI. (DO NOT OVERINFLATE!!) It is suggested to test each wheel with a low-pressure tire gauge every few weeks to maintain optimum performance. Just a few pumps with a standard hand operated bicycle pump will be enough to fill each wheel.

  It is important to realize the lower the air pressure the easier it is to move through sand, however you sacrifice some stability with a lower air pressure. It may be wise to adjust your tire pressure based on the conditions you are using them. Avoid thick vegetation with thorns and sharp sticks or jagged rocky areas and glass.

Special Notes

1. Do NOT overload beyond the 121 lb. weight load capacity, as stated on each wheel.

2. Do NOT over inflate the beach wheels beyond the 4 PSI as stated on each wheel. Use a low pressure tire gauge to determine proper air pressure.

3. Do NOT use pressurized air to fill the beach wheels. Use a manual bicycle pump.

4. Avoid storing outdoors over long periods of time in the direct sun. Prolonged direct exposure to sunlight could decrease the strength of the polyurethane tires.